ABOUT

Application:

-partition walls;
-isolating constructions of the external walls;
-heat insulation of uneven facades

In every element of the partition wall, two U-type perforated (punched) zinc -steel profiles are deposited which serve to these elements as the external frame and simultaneously as places for fastening the finishing sheet material, for instance, sheets of plaster cardboard. There are various types of partition wall elements which differ on how the zinc -steel profiles are deposited in them:

• Fully deposited (covered) in foam polystyrene;
• One edge of the profile is at the same level with the outer surface of foam polystyrene;
• Both edges of the profile are at the same level with the outer surface of foam polystyrene;

In forming the partition wall, these elements are fixed to the U-type profile near the floor and fixed to the L-type profile near the ceiling. The partition wall elements are joined by tightly pressing them together. If the elements are used for the external walls as the isolating construction, it would be advisable to glue the panels together.

Sizes of the partition wall panels from foam polystyrene:

Width, mm: 600

Thickness, mm: 60;80;100;120-200 (step 10)

Length, mm: to 12000