ABOUT
Sandwich panels are construction materials used for construction of public buildings (shops, warehouses, cold storage buildings, sports arenas, etc.) and industrial buildings, installing them on bearing constructions made of metal, concrete or wood.
Sandwich panel is an insulating, self-supporting (in roof coverings with a certain carrying capacity) multilayer construction material, made of insulating core covered from outside with metal plates in two parallel planes.
The cores of TENAX Sandwich Panels are:
• mineral wool for use in cases with high fire resistance requirements
• polystyrene foam for use in cases with medium fire resistance requirements.
These materials serve both as heat and noise insulation material.Mechanical endurance is determined by the composition of steel.
Corrosion strength is ensured by the galvanisation, its thickness, as well as polymeric coatings. The used polymeric coatings are: polyester (PE), polyurethane (PU), polyvinyl chloride plastisol (PVC), polyvinylidine fluoride (PVDF or PVF2) and other coatings;they determine the usage in different operational circumstances: aggressive, medium and non-aggressive.
The surface of steel sheet facing the adhesive substance and the surface of steel sheet facing the interior of the building are covered only with polyester coatings.
If sandwich panels are used in the construction of buildings intended for food industry, only polyester coatings with adequate permit for usage in food industry with the symbol FS (Food Safe) should be used.
TENAX Sandwich Panels are produced with polyester, incl. FS and PVDF coatings.
When ordering TENAX Sandwich Panels, you should specify the type and colour of the coating, taking into consideration both the operational circumstances and lifetime.
The thickness of panels is 50, 80, 100, 120, 150, 200 mm.
Length: 2.0 – 12.0 m.
Coating of steel sheet surface: atmospheric tolerance PE, PVDF.
There are four types of panels according to their appearance: smooth, V1, V5 and MICRO.
The colour of panels can be selected from a RAL colour catalogue.
- Wall, ceiling panel TENAX W
- Roof panel TENAX R
Wall, ceiling panel TENAX W
TENAX W wall and ceiling panels are designed for construction of external and partition walls, as well as hanging ceilings.
Their advantages are:
- Fast installation
- Simple installation
- High heat insulation
- High acoustic qualities
- Low construction costs
- Good aesthetic appearance
Length: 2,0 – 12,0 m
Width: 1200 mm
Insulation: polystyrene or mineral wool
Steel sheet with the thickness of 0.5 or 0.6 mm
Roof panel TENAX R
TENAX R roof panels are offered with a high longitudinal joint. During the installation of panels, the edges of adjacent panels are joined with an upright double longitudinal joint. Such a roof is especially suitable for weather conditions, were high wind impact and various kinds of precipitation are possible: rain, hail, snow and icing. Such roof junction is also suitable for severe temperature fluctuations.
Length: 2,0 – 12,0 m
Width: 1180 mm
Insulation: polystyrene or mineral wool
Steel sheet with the thickness of 0.5 or 0.6 mm
